Power Pong Troubleshooting

Power Pong Troubleshooting, be awesome like Bobby.

Cups does not move on power cycle or game
Every time you turn the game on all the cups should cycle up and then back down into the table to initialize the game. If you game does not do this and the ...
Tue, Feb 23, 2021 at 4:00 PM
Power Pong I/O Chart
Attached is the I/o Chart for Power pong
Tue, Feb 23, 2021 at 4:04 PM
Cup do not stop going up and down on power cycle
If you cups continuously go up and down when on power cycle. 1) Before doing anything else check your dip switch settings on the I/O board, if the issue...
Tue, Feb 23, 2021 at 4:13 PM
Game does not Score when ball goes into cup
If the game does not score a ball going into a cup the issue has to do with the ball score sensor. This is the 4 pin molex connector and the sensor is locat...
Tue, Feb 23, 2021 at 4:27 PM
Game will not credit up.
Check to make sure coin mech or dollar bill validator has power.  1) Coin mech is powered from the game power supplies and is 12 volts. when a coin passes ...
Tue, Feb 23, 2021 at 4:31 PM